Wholesale Price vs Retail Price: Markup, Margin and Pricing Examples

· Written by

Wholesale Price vs Retail Price: Markup, Margin and Pricing Examples

The difference between wholesale price and retail price looks simple until two businesses have to agree on one product. The supplier asks, “What should I charge the store?” The store asks, “What should I charge the customer?” Both answers depend on the same few numbers, and wholesale price vs retail price calculations tend to go wrong in the same place: people use “markup” and “margin” as if they meant the same thing.

They don’t. Mix them up and a price you thought gave you a 50% margin can leave you with 33.3%. This guide defines both prices, sets out the formulas for each, and follows one product from the supplier to the customer so you can see what each side keeps, and what it doesn’t.

Wholesale price and retail price are paid by different buyers

The wholesale price is what a retailer or reseller pays the supplier for each unit it will resell. The supplier sets it, and it has to cover the supplier’s own costs and leave room for its margin.

The retail price is what the end customer pays the retailer or reseller. The retailer sets it, and it has to cover the wholesale cost, the retailer’s own costs and the margin it needs.

So with wholesale price vs retail price, the same product carries two prices: one is the supplier’s revenue and the retailer’s cost, the other is the retailer’s revenue and the customer’s cost.

PriceWho pays itWho sets itWhose revenue / whose costWhat it needs to coverTypical buyer
Wholesale priceThe retailer or resellerThe supplierSupplier’s revenue, retailer’s costThe supplier’s costs and marginA business buying to resell, often in larger quantities
Retail priceThe end customerThe retailer or resellerRetailer’s revenue, customer’s costThe wholesale price, the retailer’s costs and marginA consumer buying one or a few units

Suppliers often attach a minimum order quantity to wholesale prices. That changes how the order is placed, not the maths below.

One rule before any calculation: compare both prices on the same tax basis. Wholesale prices between businesses are usually quoted before tax, while consumer prices often include it, and mixing the two makes every margin look bigger than it is.

How to calculate a wholesale price

The supplier starts from its cost basis: what one unit costs it to make or buy and get ready to sell. In the illustrative example used throughout this guide, that’s €22, and the wholesale price is €40. There are two routes to that price, describing the same gap from different angles.

From a target margin:

Wholesale price = supplier cost ÷ (1 − supplier’s target margin)

A supplier that wants a 45% gross margin on a €22 cost charges €22 ÷ 0.55 = €40.

From a markup:

Wholesale price = supplier cost × (1 + markup)

Either way, at €40 the supplier’s price spread is €18 per unit. As a markup, that’s €18 ÷ €22 = 81.8%. As a gross margin, it’s €18 ÷ €40 = 45.0%. Same euros, two percentages, because markup divides by the cost and margin divides by the selling price.

When people talk about wholesale margin, they usually mean this number: the supplier’s margin on the wholesale sale, (wholesale price − supplier cost) ÷ wholesale price.

How to calculate a retail price from a wholesale price

Now switch seats. For the retailer, the €40 wholesale price is its cost. Suppose it sells the product at €65:

  • Price spread: €65 − €40 = €25
  • Retail markup: €25 ÷ €40 = 62.5%
  • Retail (gross) margin: €25 ÷ €65 = 38.5%

If the retailer starts from the margin it wants instead, the retail price formula is:

Retail price = wholesale cost ÷ (1 − target retail margin)

For a 40% gross margin on a €40 wholesale cost: €40 ÷ 0.60 = €66.67.

Adding 40% to €40 doesn’t get you there: that gives €56, a 40% markup but only a 28.6% margin. It’s the most common pricing slip there is.

Markup and margin are not the same number

Markup and margin both measure the gap between what you paid and what you sell for. The difference is what you compare that gap to.

  • Markup compares the gap to the cost. It answers: “How much did I add on top of what I paid?”
  • Gross margin compares the gap to the selling price. It answers: “How much of every euro I take in is left after the cost of the product?”
ConceptFormula€40 → €65 exampleWhat it answers
Markup %(selling price − cost) ÷ cost€25 ÷ €40 = 62.5%How much was added to the cost
Gross margin %(selling price − cost) ÷ selling price€25 ÷ €65 = 38.5%How much of the price is left after the cost
Price from a markupcost × (1 + markup)€40 × 1.625 = €65The price for a markup you’ve chosen
Price from a target margincost ÷ (1 − target margin)€40 ÷ (1 − 0.385) ≈ €65The price for a margin you’ve chosen

To convert one into the other:

Margin = markup ÷ (1 + markup)

Markup = margin ÷ (1 − margin)

So a 100% markup is a 50% margin, and a 50% margin is a 100% markup. For the same spread, the markup is always the bigger number, because the cost is always smaller than the selling price.

50% markup and 50% margin produce very different prices

A 50% markup is not a 50% margin. On a €40 cost:

InstructionCalculationPriceWhat you actually get
“Add a 50% markup“€40 × 1.5€6050% markup, 33.3% margin
“Price for a 50% margin“€40 ÷ 0.5€80100% markup, 50% margin

Same cost, same “50%”, and the two prices are €20 apart. If you need a 50% margin and add a 50% markup instead, you’ll price the product €20 too low and end up with a 33.3% margin.

Keystone pricing is a shortcut, not a rule

Keystone pricing means setting the retail price at twice the wholesale price. A product bought at €40 sells at €80. That’s a 100% markup, which is a 50% gross margin, not a 50% markup, whatever some glossaries say.

It’s popular because it’s quick, and it’s also used in reverse: a supplier sets wholesale at half the expected retail price. Treat it as a starting point, not as the correct margin. It takes no account of:

  • category norms (a grocer’s margin and a gift shop’s are very different)
  • what competitors charge for the same item
  • payment fees, shipping and promotions
  • what customers will actually pay

Following one product from supplier to customer

Put both seats side by side and the whole chain becomes visible. Illustrative example:

PartyBuys at / cost basisSells atPrice spreadMarkupGross margin
Supplier€22€40€1881.8%45.0%
Retailer / reseller€40€65€2562.5%38.5%

From the supplier’s cost of €22 to the customer’s price of €65, the price rises by €43 across the chain. That €43 total price spread is split between two businesses: the supplier’s spread is €18 and the retailer’s is €25. Neither spread is net profit. Each business still has its own costs to pay out of it.

Two things stand out:

  1. The retailer’s markup (62.5%) is lower than the supplier’s (81.8%), yet its euro spread is bigger. Percentages on different bases can’t be compared directly. Look at the euros as well.
  2. Each party’s margin depends on the other’s price. If the supplier raises the wholesale price, the retailer either raises its retail price or accepts a thinner spread.

The spread is not the profit

Retail price minus wholesale price is a price spread, sometimes called gross profit per unit. It’s not net profit. Depending on how the business sells, some of these costs still come out of it:

  • discounts and promotions
  • payment fees
  • shipping and packaging
  • returns and refunds
  • customer service time
  • tax, if the prices weren’t compared on the same basis
  • everything else it costs to run the shop

Three illustrative examples using the €40 → €65 product:

A 10% discount. €65 × 0.9 = €58.50. Against the €40 wholesale cost, the spread falls from €25 to €18.50, and the gross margin from 38.5% to 31.6%. A 10% price cut has removed 26% of the retailer’s spread.

A payment fee. With an illustrative 3% fee (the rate is only an example), the fee on €65 is €1.95, and the spread left is €23.05. In some markets the seller can’t pass card fees on to customers, so the fee comes straight out of the spread.

A tax-inclusive retail price. If the €65 includes VAT at an illustrative 20%, the price before tax is €65 ÷ 1.20 = €54.17. Against €40, the spread is €14.17 and the margin 26.2%, not 38.5%. This isn’t tax advice, and tax treatment varies by market. The point is only that tax-inclusive and tax-exclusive prices shouldn’t be mixed in one margin calculation.

How a supplier sets a wholesale price that leaves the store room

Starting from your cost and adding a margin is necessary but not sufficient. The other question is: at the retail price the market will bear, how high can my wholesale price be before I leave the store too little room?

Work backward from the expected retail price:

Maximum wholesale price = expected retail price × (1 − retailer’s target margin)

Illustrative example: the product sells at about €65 in shops, and the retailer needs a 40% gross margin to make stocking it worthwhile. The highest wholesale price that works for them is €65 × 0.60 = €39.

Then check your own side. At €39, a supplier with a €22 cost basis has a spread of €17 and a gross margin of €17 ÷ €39 = 43.6%. If that’s enough, €39 is a workable ceiling. If it isn’t, a higher wholesale price won’t fix it: the problem is your cost, the market price or the channel.

Two business owners reviewing wholesale prices, retail prices and margins on a laptop and a printed price list
A wholesale price has to leave room on both sides of the spread, not just your own.

The 40% is an example, not a standard: what a retailer needs depends on its category, costs and discounting, so ask rather than assume. A wholesale price has to work for both sides:

  • The supplier needs to cover its cost basis and keep a margin worth having.
  • The retailer needs enough room to discount now and then, absorb its fees, customer service and returns, and still find the product worth selling.

A short pricing checklist before you quote:

  1. Know your cost basis per unit, including anything you pay to get the product ready to ship.
  2. Find the realistic retail price, not the one you’d like.
  3. Ask what gross margin your retailers need, and confirm whether they mean margin or markup.
  4. Work out the maximum wholesale price from those two numbers.
  5. Check your own margin at that price.
  6. Quote both prices on the same tax basis.

A recommended retail price (RRP, or MSRP in the US) is the consumer price a supplier suggests to its retailers. It’s a third number: not what the retailer pays you, and not necessarily what the customer pays, because retailers may price above or below it. Rules on suggested and minimum advertised prices vary by country, so take advice locally before treating an RRP as anything more than a recommendation.

Pricing looks different when the reseller never holds stock

In some arrangements the reseller never buys units into its own stockroom. It lists the supplier’s products and sells them, and the supplier fulfils the order: the familiar dropshipping pattern, though models differ in the details.

The maths doesn’t change: there’s still a wholesale price, the reseller still sets a retail price, and markup and margin work exactly as above. What changes is who carries which costs:

  • The reseller doesn’t pay for stock up front or store it, but still pays its own discounts, payment fees and customer service out of its spread.
  • The supplier keeps the stock and, when it ships to the end customer, the picking, packing and shipping cost of each order.

So a supplier pricing for resellers who never hold stock should check its wholesale price against its full cost to serve each order, not just its unit cost. For how the order itself moves between the two businesses, see what happens after a reseller makes a sale.

How Trapyfy records wholesale and retail prices between suppliers and resellers

In a supplier–reseller system, both prices from the table above are recorded separately. A supplier owns the original product and its stock, and shares products with the resellers it chooses. For each shared product it sets a wholesale price per country. In Trapyfy, the wholesale price a supplier sets for each shared product and country is called the transfer cost. The reseller sees that price before accepting the shared products, and can’t edit it afterwards.

The reseller then sets its own retail price for the product. When a customer buys, they pay the reseller at that retail price.

Trapyfy then records both sides of the spread:

  • Reseller margin: the retail price minus the transfer cost, for each transaction. In the example above, that’s the €25 between €40 and €65.
  • Supplier payables: the amount owed to the supplier, tracked at the wholesale price, not the retail price.

That margin figure is the price spread between the two businesses, not net profit: payment fees, shipping, tax and the reseller’s other costs aren’t part of it.

Every product in Trapyfy also carries a cost, regular price and sale price per country, so the same logic applies to products you sell directly. For how sharing products with partners works, see the guide to supplying resellers on Telegram.

Frequently asked questions

What is the difference between wholesale price and retail price?

The wholesale price is what a retailer or reseller pays the supplier for a product it will resell. The retail price is what the end customer pays the retailer. The supplier sets the first and the retailer the second. The gap in wholesale price vs retail price is the retailer’s price spread, which has to cover its own costs: a €40 wholesale price and a €65 retail price leave a €25 spread.

How do you calculate retail price from wholesale price?

Divide the wholesale cost by one minus the gross margin you want: retail price = wholesale cost ÷ (1 − target margin). For a 40% margin on a €40 wholesale cost, that’s €40 ÷ 0.60 = €66.67. If you think in markup instead, multiply: retail price = wholesale cost × (1 + markup). A 50% markup on €40 gives €60, which is only a 33.3% margin.

Is a 50% markup the same as a 50% margin?

No. A 50% markup on a €40 cost gives a €60 price, which is a 33.3% margin. A 50% margin on the same €40 cost needs an €80 price, which is a 100% markup. Markup divides the spread by the cost, and margin divides it by the selling price, so the same euro spread always produces a bigger markup than margin.

What is keystone pricing?

Keystone pricing sets the retail price at twice the wholesale price: a product bought at €40 sells at €80. That’s a 100% markup and a 50% gross margin. Suppliers sometimes use it in reverse, setting wholesale at half the expected retail price. It’s a quick rule of thumb, not a standard: it ignores category norms, competitors’ prices, fees and what customers will actually pay.

How much should I discount for wholesale?

There’s no universal percentage. Work backward from the realistic retail price and the margin your retailers need: maximum wholesale price = retail price × (1 − retailer’s margin). A discount off retail is the same number as the retailer’s gross margin at that price. A €39 wholesale price on a €65 retail price is 40% off, a 40% retailer margin. Then check your own margin at that price.

What is the typical markup from wholesale to retail?

It varies by category, so treat any single figure with caution. Keystone pricing (a 100% markup, or 50% margin) is the best-known reference, but some categories run on much thinner margins and others on much wider ones. When comparing figures, check whether someone means markup or margin: a “40% margin” and a “40% markup” are very different prices.

Is retail price minus wholesale price profit?

Not necessarily. Retail price minus wholesale price is a price spread, or gross profit per unit, before other costs. Discounts, payment fees, shipping, packaging, returns, customer service and tax can all come out of it. A €25 spread on a €65 sale, for example, falls to €18.50 after a 10% discount, before any other cost.

Can a reseller choose its own retail price?

That depends on the commercial arrangement between supplier and reseller. Suppliers may suggest a recommended retail price, but the reseller often sets the price it actually charges. In Trapyfy, the supplier sets the wholesale price (called the transfer cost) for each shared product and country, and the reseller sets its own retail price for that product.

A wholesale price is a promise to two businesses

A good wholesale price isn’t the highest number a retailer will accept. It’s the one that still works after both businesses have paid their costs. Get the maths right (markup on cost, margin on price, same tax basis), then test the result from both seats. If the supplier’s margin and the retailer’s margin both still work after allowing for discounts, fees and returns, the price will hold up when the product is actually selling.

When you’re ready to share products with resellers at a wholesale price you set, set up your supplier and reseller pricing on Trapyfy.